Serving Hanford, CA and surrounding areas. (559) 794-9855
Hanford homeowners and businesses trust us for concrete floors that stay clean, look sharp, and handle whatever the Central Valley throws at them.
Hanford Epoxy Flooring & Concrete Polishing is a locally owned Concrete Flooring Contractor in Hanford, CA. We handle 16 concrete flooring services across 12 cities in the San Joaquin Valley. Whether your floor is cracking, staining, or just wearing out, we assess the problem honestly and give you a clear solution - no surprises, no guesswork.
Tired of oil stains that won't scrub out? Epoxy seals your concrete so spills wipe up instead of soaking in.
Learn More
Forklift traffic and chemical spills take a toll - get a floor built to handle real commercial use.
Learn More
A dusty, stained garage floor makes the whole space feel unfinished. A coating changes that in one day.
Learn More
Back in your garage by tomorrow - polyaspartic coatings cure fast without sacrificing long-term durability.
Learn More
Want a floor that looks like polished stone? Metallic epoxy delivers a one-of-a-kind, high-gloss finish.
Learn More
Kitchens and food processing areas need a floor that handles thermal shock and constant moisture.
Learn More
Bare concrete can become a low-maintenance, reflective surface without any coating added on top.
Learn More
Add permanent color and character to plain concrete - acid stains soak in and never peel.
Learn More
Durable, decorative, and virtually maintenance-free - terrazzo is built to outlast almost everything else.
Learn More
Moisture seeping up through a basement slab needs the right coating system, not a standard garage product.
Learn More
No coating sticks to a dirty or damaged slab - proper grinding is what makes every other job last.
Learn More
Unsealed concrete absorbs everything it touches - a quality sealer keeps stains and moisture out.
Learn More
Badly worn or damaged concrete can be restored without tearing out the slab and starting over.
Learn More
Uneven floors cause problems for everything installed on top - self-leveling compound fixes that.
Learn More
A slippery or crumbling pool deck is a safety problem - a coating makes it safe and good-looking again.
Learn More
Old coatings that are peeling or failing need to come off completely before anything new goes down.
Learn MoreReach out by phone or through our contact form and describe your floor. We will ask a few basic questions about the space, the current condition, and what you are hoping to do. We respond within 1 business day and will schedule a free on-site estimate at a time that works for you.
We come to your property and look at the concrete in person - checking for cracks, moisture, stains, and surface condition. That assessment drives a written estimate that covers everything: prep work, materials, and timeline. You will know the full scope and price before anyone picks up a grinder.
Our crew handles surface preparation, coating application, and cleanup. We time jobs around Hanford's weather conditions - early mornings in summer, off-season windows when possible - so your coating cures correctly and lasts. Before we leave, we walk you through the finished floor and explain how to care for it.
We hold an active California contractor license - you can verify it in two minutes at cslb.ca.gov. Every job is covered by general liability insurance, so you are protected whether the project is a garage floor or a commercial facility.
We never quote over the phone without seeing your floor first. The condition of your concrete matters more than the square footage, so we come to you. You get a written estimate that covers prep, materials, and timeline - no pressure, no hidden add-ons later.
We have been doing this work in Hanford and the surrounding San Joaquin Valley since 2015. We know the clay soils, the summer heat, the older housing stock, and what local floors actually need. You are not getting a crew that is new to these conditions.
Every installation comes with a written workmanship warranty. If any section lifts or fails due to how the job was done, we come back and make it right at no additional cost. Ask us for the warranty terms in writing before work starts.
Ready to talk about your project? Call (559) 794-9855 or send us a message.
The crew showed up on time, prepped the floor thoroughly, and had it coated in two days. My garage floor had oil stains from 15 years of cars and they are completely gone. The finished floor looks better than I expected and it has been holding up fine through our hot summers.
Marcus T., Hanford - Garage Floor Coatings
I needed the warehouse floor coated before we moved equipment in and they worked with our schedule to get it done over a weekend. They found two spots with moisture issues during prep and addressed them before coating. I appreciated that they caught the problem instead of coating over it.
Sandra L., Visalia - Commercial & Industrial Epoxy Floor Coatings
My pool deck was cracking and slippery. They resurfaced it and added a non-slip texture. The whole process took about three days and they explained each step before they started it. No surprises and the deck looks completely different now.
James R., Fresno - Pool Deck Coatings & Resurfacing
We respond within 1 business day - usually the same day. There is no obligation to proceed after we send your estimate. After you submit, someone from our office will call you to schedule a free on-site visit where we assess your floor and put together a written quote.
(559) 794-9855Hanford Epoxy Flooring & Concrete Polishing is based in Hanford, CA and serves 12 cities throughout the San Joaquin Valley, including Visalia, Fresno, and Tulare. We cover the entire service area and aim to schedule on-site estimates within the same week of your request.
Yes - coatings applied in extreme heat cure too fast, causing bubbles and weak adhesion. Polyaspartic coatings handle temperature extremes better than traditional epoxy, making them a strong choice for San Joaquin Valley summers where concrete slab temps can exceed 110 degrees.
Surface preparation is the difference. Floors that peel quickly were almost always not properly ground before coating - the epoxy never bonded into the concrete. A floor prepared with diamond grinding and applied with a multi-layer system can last 15 to 20 years with basic care.
If you see white powdery residue (called efflorescence) on your floor or damp patches that appear after cool nights, your slab has a moisture problem. Coating over it without addressing the moisture first leads to bubbling and delamination. A moisture test before coating is non-negotiable.
Urethane cement withstands thermal shock - like hot water hitting a cold floor - without cracking or delaminating. It also resists the acids and cleaning chemicals used in food service environments. For any commercial kitchen or food processing space, it outperforms standard epoxy on every practical measure.
If the slab is structurally sound but the surface is cracked, stained, or worn, resurfacing with an overlay is almost always more cost-effective than slab replacement. Overlays bond to existing concrete and can hide significant surface damage without the expense and disruption of demolition. The concrete industry's leading resource, the Concrete Network, offers guides to help homeowners understand when resurfacing is the right call.
For most residential and commercial coating projects on existing slabs, a building permit is not required - it is considered a cosmetic surface treatment. If the project involves structural concrete repair, drainage changes, or is part of a larger renovation, a permit may apply. The California Department of Consumer Affairs has resources on contractor licensing and consumer rights when hiring for this type of work.
Hanford Epoxy Flooring & Concrete Polishing is a licensed and insured Concrete Flooring Contractor company based in Hanford, CA, serving 12 communities across the San Joaquin Valley since 2015.
Our contractors hold an active license through the California Contractors State License Board, the state authority that regulates all contractor work in California. You can verify our license at any time at cslb.ca.gov.
Since 2015, we have completed projects across 16 concrete flooring services - from residential garage floors to commercial and industrial facilities - throughout Kings County and the broader Central Valley.
Want to know more about our team and how we work? Read our About page.
Applying a coating to concrete that holds hidden moisture is the fastest way to end up with a floor that bubbles and peels within months. The test takes minutes. Any contractor who skips it is saving themselves time at your expense.
Listen for the grinder. Proper mechanical preparation is loud and takes several hours for a standard garage. If a crew arrives, mops the floor, and starts applying coating within an hour, the prep was not done. Good prep is the foundation of a lasting floor.
Not automatically - but an unusually low bid often means the contractor is skipping prep steps or using thinner materials. Ask what is included in the price, specifically: grinding, crack repair, primer coat, topcoat. A complete answer tells you what you are buying.
If you have questions about your specific floor or want an honest assessment before deciding, call us at (559) 794-9855 or send us a message. We also recommend reviewing guidance from the OSHA Walking-Working Surfaces standards if your project involves a commercial or industrial space where slip resistance and flooring safety are a compliance concern.
Hanford is the county seat of Kings County and home to roughly 58,000 people in the heart of California's San Joaquin Valley. It sits roughly halfway between Fresno and Bakersfield on a flat agricultural plain that has shaped both the local economy and the physical conditions that affect every home in the area. Most of the city's housing stock was built between the 1940s and 1980s, which means older concrete slabs, decades of accumulated wear, and the soil movement that comes with generations of wet winters and dry summers.
The area around the Fox Theatre and the Kings County Courthouse includes some of the city's oldest neighborhoods - Victorian and Craftsman homes that are over a century old with concrete slabs that have been shifting with Hanford's clay soils for decades. Farther out, newer subdivisions on the north and east sides of town present different conditions: larger slabs, more recent construction, and different patterns of wear. We work on both. A significant portion of the population works in agriculture, food processing, or serves NAS Lemoore, the major Navy air station located about 7 miles northwest of the city center.
Hanford Epoxy Flooring & Concrete Polishing has been working in Hanford since 2015, and we understand what local floors actually deal with: summer heat that regularly climbs past 100 degrees, tule fog seasons that keep surfaces damp for weeks, and clay-heavy soils that expand and contract enough to crack concrete slabs every few years. That local knowledge shapes how we assess your floor, what products we recommend, and how we time the work. Whether your home is near downtown or in a newer part of town, we serve all of Hanford and 11 surrounding communities.
By appointment only, no walk-ins.
Hanford Epoxy Flooring & Concrete Polishing
217 Porter St, Hanford, CA 93230
hi@hanfordepoxyflooringandconcretepolishing.com
Always open, 24/7.
Call Hanford Epoxy Flooring & Concrete Polishing today for a free on-site estimate - no obligation, no pressure, just an honest look at your concrete.
